WEPD Nova 1:64 Model Car LED Light Kit Tiny Scale Car Lighting Upgrade Set

Brand: WEPD 

Model Number: WEPD-Nova

Package Contents:

1. Pre-soldered electronic module*1 (with LED beads)

2. Remote controller*1 (for light control)

3. Charging module*1 (external charging use, Type-C interface, not for installation in the model)

4. User Manual*1

(Note: Features vary by purchased option. Unselected features will not be included. Please verify your chosen option.)

1. Headlight and taillight functions （Standard）

2. Independent turn signal and hazard warning light functions（Standard）

3. Police strobe light function（Optional）

*(1 inch = 25.4mm; all dimensions in mm)*

1. Standard battery: Rechargeable 50/10/12 model (thickness 5mm, length 12mm, width 10mm). Includes charging port for maintenance-free use after installation.

2. Main control module size: ~9.8mm*13.7mm

3. All LED beads: 0603 model (size ~1.6mm*0.6mm)

Warnings:

1. 1. This product contains batteries and small parts. It is not suitable for children under 14 years old. Keep it out of reach of children to avoid hazards.

   2. During installation, ensure that the soldering points of the LED beads and the module do not come into direct contact with metal. Otherwise, it may cause a short circuit, resulting in malfunction or damage to the module.

   3. Do not pull the wires during installation, as this may cause wire breakage and affect functionality.

   4. Never puncture or compress the battery to avoid damage, which could lead to fire or personal injury.

   5. Turn off the main power switch of the module before charging. Do not charge unattended, and keep the charging process away from humid environments and flammable materials.

   6. Use only a 5V-1A or 5V-500mA charger. Fast charging is strictly prohibited, as it may damage the module or cause other risks.

   7. Ensure correct polarity alignment when connecting the charging interface (red-to-red, black-to-black). Reverse polarity will directly cause a short circuit and pose a danger.

   8. Monitor the charging board’s LED status during charging:

      • Solid red light: Charging in progress.

      • Green LED lit or blinking: Charging complete. Disconnect promptly.

      • If the LED turns off immediately after plugging in, check for reversed polarity.

      • Despite built-in overcharge and short circuit protections, always unplug the charger immediately after full charge and strictly avoid improper charging practices.

   9. During installation, ensure the infrared receiver isn't fully blocked; this can hinder signal reception and prevent the remote control from working. Place it where infrared light can directly reach. Also, avoid putting the receiver near strong red or blue LED lights, as they may interfere with the signals. If you're unsure about the installation spot, test the signal reception several times during installation. This ensures the module works properly once installed.